2-3
CHAPTER 2 Checks and Preparation
2.3 Nomenclature and Functions
This section describes the names and function of the device.
USB memory terminal
External input/output terminals
Control panel keys
• LOGIC/PULSE
• EXT TRIG/SAMPLE
• ALARM/TRIG
PC interface terminals
• USB
• LAN
Power switch
Analog signal input terminals GND terminal
AC adapter jack
SD CARD
Tilt foot
Tilt stand xing screw
(Screw hole M4, Depth 6)
Label
Battery cover
Two battery packs (B-569: option)
can be installed.
Monitor
Operation status LED
• POWER ON when the power is ON
Blinking while accessing to the
memory
• START ON during data capture
• CHARGE ON while the battery is charging
Humidity sensor
(B-530: Option)
Power jack for humidity sensor
To Next Page
Loading...
