GRAPHTEC GL980 - Cancel Auto Save; Specify Save Destination

3-123
CHAPTER 3 Settings and Measurement
(7)-5 Cancel auto save
Auto save process can be cancelled when the recording destination is set to internal RAM and Auto save is
performed.
Select "Cancel auto save” and press [ENTER] key to cancel the auto save process.
(7)-6 XY overwrite
Perform XY overwrite settings.
You can select it when XY screen is displayed.
(1)
(2)
Setting Description
(1) Select File Select the image le to be XY-overwritten and perform XY overwrite.
The image le is a screen copy of the le menu being XY-displayed, and the storage range is
the image le saved as the waveform screen.
(2) Overwrite clear Erase the XY overwritten image and nish the XY overwrite.
For details, refer to "3.5 Setting Menus" - "(3) DISP settings" -"(3)-3 XY display" - " XY overwrite".
(7)-7 Screen copy
Save the copy image of the display screen in the internal memory/SD card/USB memory.
Specify save destination
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
Setting Description
(1) File Type Set the le format of image data.
BMP: Image data is created in BMP format.
PNG: Image data is created in PNG format.
(2) Name Type Set the naming method for the data le.
Auto: File name is appended automatically.
Example) 20170201-123456.GBD
Numbers part ..... Date and time when the le was created
* Example: 2017 year 2 month 1 day 12 hour 34 minute 56 second
BMP .................... Data format
BMP (BMP format)
PNG (PNG format)
Arbitrary: Data is saved with the le name you entered.
Serial number: Image data le is created by appending a serial number to the arbitrarily
entered le name.
[Auto] (3) Folder Set the folder of the save destination.
[Arbitrary]
[Serial
number]
(3) Folder
File
Set the data le name.
The folder for saving the le is displayed in the Folder.
(4) Save range Set the range of the image data to be saved.
All screens: The entire screen is saved as image data.
Waveform screen: Only the waveform display part is saved as image data.
Execution
Execute the screen copy to save the image data le in the saving destination set in "Specify save
destination".