GRAPHTEC GL980 - DISP Settings; Y-T;Y-T (All Waveforms) Display; Display Mode

3-82
CHAPTER 3 Settings and Measurement
(3) DISP settings
Set the screen display settings.
(3)-1 Y-T/Y-T (All waveforms) display
Setting Description
Display mode Set the display mode of the screen.
Y-T, Y-T (All waveforms), Logging, XY
Time/DIV Set the Time/DIV.
Range depends on the sampling interval.
Zone division Set the number of zone divisions.
1, 2, 4, 8
Zone Set the zone allocation for analog CH and pulse CH.
1 to 8
Logic zone Set the display position of the logic CH.
1 to 10
Display mode
Select the screen display mode.
Setting Description
Y-T Set to Y-T waveform + Digital display.
Y-T (All waveforms) Set to All the waveforms on Y-T waveform display.
Logging Set to Logging display/Real time statistical calculation display.
XY Set to XY waveform display.
The contents in the DISP menu depend on each display mode.
Y-T waveform + Digital display Y-T All waveforms display
Logging display Real time statistical calculation display
XY waveform display