GRAPHTEC GL980 - Room Temperature Compensation; Temperature Unit; Background Color; Start;Stop Confirmation Message

3 -114
CHAPTER 3 Settings and Measurement
(6)-5 Temperature settings
Set the items related to temperature.
Room temperature compensation
Set whether thermocouple room temperature (terminal temperature) compensation of this device is used or
not.
Setting Description
Internal Room temperature compensation of this device is enabled.
(Normally you should select this.)
External Set it when compensating for room temperature with external equipment.
Temperature unit
Switch between °C (Celsius) and °F (Fahrenheit) units when setting the temperature.
°F (Fahrenheit) is calculated by the following formula.
°F (Fahrenheit) = °C (Celsius) x 1.8 + 32
When checking accuracy, calculate with Celcius accuracy x 1.8.
(6)-6 Background Color
Set the background colors of the waveform display area and the digital display area.
(6)-7 Start/Stop conrmation message
Set whether to display the conrmation message at start/stop.
Setting Description
Off Conrmation message is not displayed when starting/stopping.
On Conrmation message is displayed when starting/stopping.