GRAPHTEC GL980 - XY Overwrite

3-93
CHAPTER 3 Settings and Measurement
XY Overwrite
(1)
(2)
Setting Description
(1) Select File Select the image le to be overwritten and then perform the XY overwriting.
The image le is a screen copy of the le menu in XY display, and the storage range is the
image le saved on the waveform screen.
(2) Overwrite clear The XY overwrite image is erased and the XY overwriting is completed.
You can display the image le as a "Waveform screen" to be the background image of the XY graph at XY
waveform display.
(Other than the waveform screen image le saved by this device are not available.)
No XY Overwriting XY Overwrite Display
Save waveform screen
Overwrite
Overwrite
(Background)
The background image to be overwritten is not erased even if operating the XY display clear.
Perform "Overwrite clear" separately.
* It is overwritten even during replaying.
The Overwrite is a function to read the image as image data to the background. For the waveform displayed
in the background, even if you change the XY position and VERNIER setting, etc., it will not be overwritten.