GRAPHTEC GL980 - Recording Destination File Name (File Capture)

3-77
CHAPTER 3 Settings and Measurement
(2) -11 Recording destination le name (le capture)
Set the le name and folder name of the recording destination when capturing data.
< When the automatic naming method is used >
(1)
(2)
(3)
(4)
< When any le name and serial number is used for naming method >
(5)
< When CSV le is used as le format >
(6)
(7)
Setting Description
(1) File Type Set the le format of data.
GBD: The data le is created in our own binary format.
* Data cannot be changed.
CSV: The data le is created in text format.
(2) Name Type Set the naming method for the data le.
Auto: File name is created automatically
Example) 20170728-123456.GBD
Numbers: Date and time when the le is created
* The above example shows July 28, 2017 12:34:56
Arbitrary: Captured data is saved to the le with the le name you entered.
Serial number: Recorded data is saved to the le with the le name you entered and the
serial number.
Example) When the le name is set to "TEST"
1st time: TEST_SER1.GBD
2nd time: TEST_SER2.GBD
3rd time: TEST_SER3.GBD
* If the same le name already exists, “_CP*” is added to the end of the le name to avoid
any overwrite.
The part of * is a number.
Example) TEST_CP1.GBD
(3) Folder Set the folder of saving destination when Auto is selected as the naming method.
(4) Prex Set the prex character string of the le name.
When a prex character string is set, the prex character string set before the automatically
created le name (date/time/time le name) is added.
Example) When "PRIFIX" is set as prex character,
The le name is "PRIFIX_20170728-123456.GBD".
(5) File Set the saving le name when Arbitrary and Serial number is selected in naming method.
The folder for saving the le is displayed in the Folder.
(6) CSV decimal point Set the decimal point character of the CSV le.
Period (.), Comma (,)
(7) CSV delimiter Set the delimiter of the CSV le.
Comma (.), Tab, Semicolon (;)
The le should be saved in the folder you created. When the data les continue to save in the root folder,
the le may be not saved regardless of the remaining memory capacity due to the limitations of the le
system.