GRAPHTEC GL980 - DATA Settings; Set Items Related to Data Capturing; Capturing Destination File Name

3-69
CHAPTER 3 Settings and Measurement
(2) DATA settings
Set items related to data capturing.
< When the capturing destination is internal
memory, SD card, USB memory >
< When the capturing destination is internal RAM >
Setting Selections available
Sampling Set the main sampling.
(1, 2, 5, 10, 20, 50, 100, 200, 500 μs)
1, 2, 5, 10, 20, 50, 100, 200, 500 ms
1, 2, 5, 10, 20, 30 s, 1 min, External
* The setting range varies depending on the recording destination.
You can select the values in parentheses only when the internal
RAM is set.
Pulse sampling intervals Set the Pulse sampling intervals.
(10, 20, 50, 100, 200, 500 μs)
1, 2, 5, 10, 20, 50, 100, 200, 500 ms
1, 2, 5, 10, 20, 30 s
1, 2, 5, 10, 20, 30 min, 1 hour
* Setting range varies depending on the capturing destination. You
can select the values in parentheses only when the internal RAM is
set.
Capture
des.
Set the data capturing destination.
Internal RAM, internal memory, SD card, USB memory
[Internal
memory]
Memory block division Set the memory division.
No division, 2-division, 4-division, 8-division
Block status The memory block usage state is displayed.
Overwrite mode Set the overwrite mode of the data in the internal memory.
Off, On
Internal RAM clear The data captured to the internal RAM is erased.
Data pts. Set the number of data to be captured to the internal RAM.
10 to 4000000
* The setting range varies depending on memory block division.
Ring recording Set the ring capturing.
Off, On
Auto Save Set the auto save.
Off, On
File Name Set the auto saving destination.
* Refer to the following "Capture des.: FileName".
[Internal
Memory]
[SD card]
[USB
memory]
Capture des.:
FileName
Set the saving destination of captured data.
* Refer to the following "Capture des.: FileName".
Capture des.:
Ring/Relay capture
Set the ring capture/relay capture.
Off, Ring, Relay
Backup Intervals Set the backup interval.
Off, 1 hour, 2 hours, 6 hours, 12 hours, 24 hours, specied time
Backup Destination Set the backup destination.
Internal memory, SD card, USB memory
Save Folder Set the saving folder and the path of the backup destination.
Capturing destination le name
Setting Selections available
File Type Set the saving format of data le.
GBD, CSV
Name Type Set the le naming method.
Automatic, Arbitrary, Sequential number
[Auto] Folder Set the folder of the auto saving destination.
Prex Set the prex character string of le name.
[Arbitrary]
[Sequential
number]
Folder
File
Set the data le name.
The folder for saving the le is displayed in the Folder.