GRAPHTEC GL980 - 4.3 Accessories;Optional Accessories

4-10
CHAPTER 4 Specication
4.3 Accessories/Optional Accessories
Control Software
Item Item
Compatible operating system Windows10/Windows8.1/Windows8/Windows7 (SP1 or later)
Function Main unit control, realtime data capture, data conversion
Number of connected units GL980_2000-APS: 1 devices, GL-Connection: 20 devices
Settings AMP settings, capture settings, trigger/alarm settings, others
Capturing to internal RAM Binary: Sampling interval 1 μsec. to 1 min.
* Transferring while capturing to internal RAM
Real time capturing Binary: Sampling interval 1 msec. to 1 min.
CSV: Sampling interval 1 msec. to 1 min.
Display Analog waveforms, logic waveforms, pulse waveforms, digital values
Display modes Y-T View, Y-Y View, Digital View
File conversion Between cursors, All data
Statistic/History Displays the maximum, minimum, average values, peak value
Standard Accessories
Item Remarks Quantity
Quick Start Guide GL980-UM-85x 1
CD-ROM User's Manual, Application software 1
TO ENSURE SAFE AND
CORRECT USE
SAFETY PAMPHLET 1
AC cable/AC adapter 100 to 240 VAC, 50/60 Hz 1
Ferrite core For attaching each cable 4
M3.5 Flat screw For thin-type thermocouple 20
Tilt stand Tilt stand x2, M4 x 5 screw 2, M4×8 screw 2, specer×3 1
Battery Pack (Option)
Item Description
Battery type B-569 (7.2V/2900mAh)
Running time Install 2 batteries in this device (2 batteries required for battery operation)
LCD luminance MAX: Approx. 2 hours
When screen saver is activated: Approx. 2.5 hours
* Conditions
1-sec sampling, capturing to internal memory, new battery pack 2 pcs., +25°C
environment.
Charging method Mount in this device
Time required for charging Battery pack x 1: approx. 5 hours
Battery pack x 2: approx. 10 hours
Switchover in the event of a
power failure
Because the battery is used together with the AC adapter, the power supply will be
switched automatically to the battery in the event of a power failure.
* The AC adapter is the primary power source.
Operation environment Drive: 0 to 40°C, Charge: 15 to 35°C (power OFF) /15 to 25°C (power ON)
Other functions • When the battery is running low, le is closed automatically.
(When capturing to internal memory, USB memory or SD card)
• Automatic backup to internal memory when capturing to internal RAM
• Remaining amount indicator