GRAPHTEC GL980 - 3.2 Key Operation

3-17
CHAPTER 3 Settings and Measurement
3.2 Key Operation
This section describes key operation.
(1) CH SELECT (2) SPAN/TRACE/POSITION
(3) TIME/DIV
(4) MENU
(6) DIRECTION Keys
(7) ENTER
(8) FAST FORWARD (KEY LOCK)
(9) START/STOP (USB DRIVE)
(5) QUIT
(13) FILE
(14) FUNC
(11) DISPLAY
(10) REVIEW
(12) CURSOR (ALARM CLEAR)
(1) CH SELECT
Moves CH and item in digital display.
Use keys on the CH SELECT buttons to move the logging screen and real
time statistics calculation screen up and down.
Y-T waveform screen
Move down with the
key
Move up with the
key
XY waveform screen
Move down with the
key
Move up with the
key