GRAPHTEC GL980 - Page 91

3-47
CHAPTER 3 Settings and Measurement
In the "MONITOR" display during replaying, the cursor moves on the selected axis. Move to decreases move
/left (down) with the key, and to increases move /right (up) with the key.
Select X-axis
key key
Select-Y axis
key
key
• Cross key mode
Move XY-CH with [CH SELECT] key (hereafter CS key).
Use the keys to change the contents of the X-axis, and use the keys to change the contents of
the Y-axis.
(In Quick setting area, use the key to change contents.)
Use CS key to move XY-CH.
Move XY-CH
Use the CS key or the
key to move down.
Use the CS
key or the
key to move down.
Use the CS
key or
the
key to move up.
Use the CS
key or
the
key to move up.
Change the setting contents of X-axis for XY-CH selected with the keys.
The keys
Change the setting contents of Y-axis for XY-CH selected with the keys.
The keys