GRAPHTEC GL980 - Page 150

3-106
CHAPTER 3 Settings and Measurement
Setting Selection available
Notication
settings
Alarm Set the E-mail send when an alarm occurs.
Off, On
Low battery Set the E-mail send when the internal battery
lowers.
Off, On
Drive free space Set the E-mail send when the drive free capacity
during recording is low.
Off, On
Periodic
notications
Set the periodic notication E-mail send.
Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours,
Specied time
* Set the specied time to the hour : minute :
second.
E-Mail Send
Server Settings
Send (SMTP) Server Name Set the E-mail Send Server Name (server
address).
Enter string up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notied from the mail
provider.
SMTP port number Set the port number of the E-mail Send Server.
0 to 65535
* Enter the port number notied from the mail
provider.
Time zone Set time zone.
UTC-12:00 to UTC+13:00
* This is a common setting for time zone setting
with POP3 server setting and NTP setting.
SMTP authentication method Set the SMTP authentication method.
Off, POP before SMTP, SMTP-AUTH
SMTP-AUTH Set the authentication method of SMTP-AUTH.
PLAIN, LOGIN, CRAM-MD5, DIGEST-MD5
POP3 server settings Set it when POP before SMTP is selected in
SMTP authentication method.
Receive (POP3)
Server Name
Set the E-mail receiving server name (server
address).
Enter the string of up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notied from the mail
provider.
POP3 port
number
Set the port number of the E-mail receiving
server.
0 to 65535
* Enter the port number notied from the mail
provider.
Time zone Set the time zone.
UTC-12:00 to UTC+13:00
* It is common setting with the time zone setting
of SMTP server setting and NTP setting.
POP3 encryption Set the encryption of POP3 server.
Off, StartTLS, Over SSL
* Set the encryption notied from the mail
provider.
The same as
SMTP
Set whether to use the same POP3 user name
and POP3 password as SMTP user name and
SMTP password.
No, Yes
POP3 user name Set the user name to log in to the POP3 server.
Enter the string of up to 63 characters.
POP3 password Set the password to log in to the POP3 server.
Enter the string of up to 63 characters.
SMTP user name Set the user name to log in to the SMTP server.
Enter the string of up to 63 characters.
SMTP password Set the password to log in to the SMTP server.
Enter the string of up to 63 characters.
SMTP encryption Set the encryption of the SMTP server.
Off, StartTLS, Over SSL
* Set the encryption notied from the mail
provider.
E-mail Address Set your own E-mail address.
Enter the string up to 63 characters.
Test email A test E-mail is sent.
Identication name Set the specied name to be used in our
application (GL980-2000_APS).
Enter the string of up to 15 characters.
Apply Settings Conrm TCP/IP settings and restart TCP/IP
processing.