3-45
CHAPTER 3 Settings and Measurement
• During replays
X-axis CH number
X-axis CH annotation
XY-CH number
Active XY-CH
Y-axis CH annotation
Y-axis CH number
RANGE/SPAN mode
display
Inactive XY-CH
XY-CH number
RANGE/SPAN mode
display
Value indicated by
selected cursor on X-axis
Value indicated by
selected cursor on Y-axis
XY-CH number : XY-CH number
RANGE/SPAN mode display : Displays which CH is operating in the RANGE mode or the SPAN mode.
X(Y)-axis CH number : Analog CH number set to the X(Y)-axis.
X(Y)-axis CH annotation : Annotation of the analog CH set to the X(Y)-axis is displayed. When the
number of annotation characters is larger than the display area, all the
character strings are displayed by scrolling to the left.
X(Y)-axis cursor A (B) indication
value :
The indication value on the graph designated by each cursor is displayed.
Value differences between cursor A and B on X(Y)-axis
: Displays the difference of measured values between cursors A and B.
When cursor A is selected, B-A value is displayed. When cursor B is
selected, A-B value is displayed.
Value indicating by selected cursor
: The indication value on the graph designated by the current selected
cursor is displayed.
To Next Page
Loading...
