Cleaning
96
1.10 GB (2019/02/28)
Cleaning
Observe the safety instructions in the Cleaning, Maintenance, Service section!
Clean the applicator at regular intervals. See the maintenance schedule for the intervals and the components to
be cleaned.
You will find information on the individual assemblies in the sections below:
Label Web Brake
The brake plate can be completely removed.
Pull in the direction of the arrow and note that you will have to overcome a bit of resistance. Do not pull on the
black release knob.
Pivot Beak
Remove the guide roller 2 together with the axle to clean it.
To Next Page
Loading...
