Description of the Applicator
20
1.10 GB (2019/02/28)
Description of the applicator
Description of the Applicator
The HERMA 500 applicator is an electronically controlled device that is used to apply different adhesive labels to
a wide variety of products.
You can use the applicator to unwind label reels, dispense labels from the backing paper and then roll up the
backing paper.
See the “Applicator Overview” section.
Adhesive Labels – Designations
1 Label reel
2 Roll core
3 Label
4 Backing paper
3+4 Label web
The labels can be wound facing either inward or outward.
To Next Page
Loading...
