Intended Use of the Machine
14
1.10 GB (2019/02/28)
Make sure you tie back any long hair (wear a hairnet if necessary) and avoid loose
clothing.
Make sure to always wear safety shoes.
Make sure you read these instructions before you work on the machine.
Make sure to wear safety gloves.
Intended Use of the Machine
The HERMA 500 applicator is an electronically controlled device that is used to apply different adhesive labels to
a wide variety of products.
You can use the applicator to unwind label reels, detect and dispense labels from the backing paper and then roll
up the backing paper.
The machine is intended solely for industrial and/or commercial use. Private use is not permitted.
Do not use for any other purposes!
Using this machine for purposes other than the intended purposes could result in hazards. Any purposes other
than those described here are not intended and not permitted. Applications that are not intended include but are
not limited to:
– Winding materials other than label reels
– Driving materials other than label webs and label reels
– Use for private purposes
We hereby expressly inform you that any unintended use may result in property damage or personal injury.
The user bears sole responsibility for injuries or damage caused by improper use that is not in accordance with
these operating instructions.
To Next Page
Loading...
