Documentation HERMA 500
1.10 GB (2019/02/28)
13
Signal Words: Definitions
Identifies a hazard that, if not avoided, will result in death or serious injuries.
Identifies a hazard that, if not avoided, could result in death or serious injuries.
Identifies a hazard that, if not avoided, could result in moderate or minor injuries.
Identifies a situation that, if not avoided, could result in damage to the machine.
Indicates information that should be observed.
Safety Symbols
The following symbols are used on the machine and refer to a potential danger. Be particularly careful at these
points. Make sure you have read and understood all safety instructions.
Dangerous electrical voltage
Risk of being drawn in
Hot surface
These symbols indicate that the associated instruction must always be followed.
Disconnect the machine from the power supply.
To Next Page
Loading...
