Documentation HERMA 500
1.10 GB (2019/02/28)
49
Transport, installation, connection, storage and disposal
Transport, Installation, Connection, Storage and Disposal
Authorised staff
Specialist – for activities that do not involve accessing the electrical system
Trained electrician – for work on the electrical system
Network security must be at a correspondingly high level. The HERMA 500
applicator must be part of a secure network with limited access. If the
applicator is connected to the Internet, we recommend strict use of a VPN
or HTTPS channel.
The security methods required are determined by the efficiency of the other network elements (firewall, anti-virus
protection and protection against the threat of malware).
We recommend changing the preset passwords and repeatedly changing these passwords at regular intervals
(e.g. every 90 days). See the “Login” section.
New passwords must be clearly distinct from the old passwords.
Transporting the Applicator
The transport class in accordance with DIN EN (IEC) 60721-3-2 is Class 2M2.
Hazards during transport
Improper transport of the machine without due consideration could present dangers for the transporter and third
parties. For this reason, observe the following:
Disconnect the power supply before transport of any kind.
Installation/removal may only be performed by trained specialists when the machine is disconnected from the
power supply. Before power input, the machine must be properly secured and the protective covers must be put
back on.
Always wear safety shoes.
Always make sure that you use suitable transport equipment and observe the machine’s centre of gravity; i.e.
To Next Page
Loading...