Documentation HERMA 500
1.10 GB (2019/02/28)
23
The “Settings – Retooling the Product” section describes the settings you can make on this unit.
Unwinder: Motorised
Possible hazard at pendulum
If hazard areas arise during operation as a result of the pendulum, you must secure these areas appropriately.
Inserting the Label Web
Insert the label reel such that the labels reach the dispensing beak in the correct position.
Mount the counterholder 2 (only for vertically installed applicators).
Insert the label web according to the diagram below. Switch the unit on and off using the switch /
illuminated button a.
To Next Page
Loading...
