Opening and Editing Parameters
78 1.10 GB (2019/02/28)
Operating menus
Operating Menu
The operating menu is divided into several submenus where you can access the various parameters. You will find
information on these menus in the sections below.
For an overview of the menus, see “Menu Navigation and Structure”.
NOTICE: You can see an explanation for a parameter by tapping on the parameter text and then on the icon on
the display.
For parameters that require additional explanation, these explanations can be found in the corresponding sections
of the manual.
Help
Open the “Quick guide”, the operating instructions and FAQs.
You will find the following items in this menu:
Your Safety Detailed information regarding safety. Make sure you follow these instructions!
Quick Guide
A quick overview of set-up mode, important points for operating the applicator, information
about threading the label web and about menu navigation and a list of frequently asked
questions (FAQs).
Operating
Instructions
The complete operating instructions for this applicator (which you are currently reading).
An enhanced operating manual with various graphics and additional information can be
found in the service portal at https://www.herma.com/machines.
Format
Create and access formats.
A format is a set of parameters for processing a specific product. Saving and reusing formats allows you to set all
necessary parameters and their values with a single click.
You can create up to 99 formats.
To Next Page
Loading...
