Herma 500 - Login; Password levels

Documentation HERMA 500
1.10 GB (2019/02/28) 65
Login
Tap this button to log into the control program using the correct password for the job/application.
The current password level is displayed once you have logged in (here: level 3).
Note: Passwords for the HERMA 500 applicator consist only of digits, like a PIN.
Password levels
Passwords are assigned to various levels. The following levels are provided:
1 (User 1)
Only the user parameters assigned by the technician are visible and can be edited.
The default password is “1111”.
The technician can change the password.
2 (User 2)
All parameters are visible, but only the user parameters can be edited.
The default password is “2222”.
The technician can change the password.
3 (Technician)
Can execute workflow-based set-up mode. See the “Extended settings” section.
Can assign new passwords for users 1, 2 and 3.
Can enable functions.
Can edit all enabled functions.
Can define the user parameters.
The default password is “3333”.
The technician can change the password.
4 (Service
Customer)
User level for the customer’s service technician.
The default password is “4444”.
Passwords beyond level 4 are intended only for HERMA.
We recommend changing the preset passwords and repeatedly changing
these passwords at regular intervals (e.g. every 90 days). See the
“Extended settings” section.
New passwords must be clearly distinct from the old passwords.