Documentation HERMA 500
1.10 GB (2019/02/28)
11
Safety
Safety Instructions
Click/tap on the header or the icon for these instructions to read the entire text. Click/tap on to
collapse the text.
Important safety precautions
Servicing the machine may require you to enter unprotected areas. Switch off the power supply before
maintaining or cleaning the machine. Secure the main switch so that it cannot be switched back on without
authorisation. After finishing the work, reattach any protective covers. Otherwise, you could be seriously injured.
Untrained staff are not familiar with the machine and the dangers it may present. The machine may only be
operated, maintained and serviced by trained personnel. Additional training must be provided on a regular basis.
Serious injuries could occur.
Various movements occur in and on the machine during operation, and could also occur unexpectedly. Do not put
your hands into the machine during operation. Serious injuries could occur.
The unwinder and rewinder rotate during operation. During operation, never reach into the area of the
unwinder or the backing paper take-up unit. Do not wear your hair down or wear loose clothing. You could get
caught in the units and be injured.
If a pneumatic hose should come loose for any reason, it may move and thrash about uncontrollably. Make sure
you are always able to switch off the air supply quickly. Otherwise, you could be injured.
During operation, the machine is supplied with electrical voltage. Do not open the housing while the machine is in
operation. Otherwise, you could be seriously or even fatally injured.
Caution: risk of cutting injuries
During operation, there is a risk of being cut when the label web is moving. During operation, never reach into the
area of the label web. You could be injured.
Wear safety gloves.
To Next Page
Loading...
