Safety Instructions
12
1.10 GB (2019/02/28)
General safety instructions
If protective equipment is not working and fundamental processes are not observed, the operating staff’s safety
cannot be ensured. For this reason, observe the following:
Before starting the machine for the first time, ensure that the protective equipment is functioning properly. Check
again before each time you start work on the machine.
If any protective equipment is not functioning properly, replace it or repair it immediately.
The technical condition of the protective equipment must be inspected at regular intervals by a qualified person, at
least once annually.
If you cannot ensure safe operation of the machine, you must immediately shut down the machine and secure it
against future use.
Only use the machine to process suitable products.
Do not bypass any safety switches.
Note the cleaning methods described in these instructions.
Only use original replacement parts and accessories.
Do not modify the machine.
Failure to observe this information could result in serious injuries to the users.
Plug connection
When plugging the applicator’s plug into a socket or coupling, make sure that the connection is safe and has a
compatible design. In particular, make sure that the connection provides safe earthing.
Failure to observe this information could result in serious injuries to the users.
The user bears sole responsibility for injuries or damage caused by improper use that is not in accordance with
these operating instructions.
To Next Page
Loading...
