Maintenance Schedule
98 1.10 GB (2019/02/28)
Recommended interval // Maintenance task
Daily
Dispensing system / transfer system
Remove any adhesive residue and clean the unit.
Applicator transport roller
Remove any adhesive residue and clean the unit.
See also the operating instructions for the applicator.
Applicator brake plate
Remove any adhesive residue and clean the unit.
See also the operating instructions for the applicator.
(Guide) rollers
Remove any adhesive residue and clean the unit.
Sensors
Remove the dust from light barriers/sensors with a soft, dry cloth (if applicable, see the
separate instructions for the relevant sensor).
Weekly
Housing/frame
Clean the unit, including the display.
Pneumatic system (if applicable)
Check the air supply and components (see the separate instructions for the components
if applicable).
Monthly
Signal columns (if applicable)
Check the lamps.
Every 5 years
Check all pneumatic lines to see if they have become porous; replace them if
necessary (if applicable).
To Next Page
Loading...
