Herma 500 - Page 9

Documentation HERMA 500
1.10 GB (2019/02/28) 1
Before using the product, read all the instructions and make sure you have understood everything.
The instructions contain important information for protecting your personal safety. Anyone who works on
this machine at any stage in production must have read and understood these instructions.
The “General information” chapter, which contains information about all types of safety instructions and
what they mean, and the “Safety” chapter, which provides detailed information about your personal safety
and the responsibilities of various users of this product, are especially important.
Find out about the applicable accident prevention regulations at the operation site, as well as general
safety regulations.
Keep these instructions and all supporting paper documents (“documentation”) such as the wiring
diagram in a safe place for later use.
This documentation is an integral part of the machine. It must be available at the operation site at all times
for the entire service life.
Failure to have the instructions available at all times could result in serious injuries, including death, or
damage to property.
If the machine is resold, the complete documentation must be handed over to the new owner.
Note that you as the operator of the machine bear the risk and liability in the following situations:
 Failure to comply with these instructions
 Use other than as intended
 Use by untrained staff
 Connection to an unauthorised electrical system
 Use of unauthorised replacement and spare parts
 Repair and replacement of the product or a part of it due to normal wear, vandalism, accidents, negligence
or other reasons for which the manufacturer is not at fault
 Repairs, modifications or settings on the product made by or on behalf of the customer without the
manufacturer’s written consent
 Improper raw materials or supplies
 Inappropriate use
 Improper use
 Misuse
 Accident
 Modification