How to fix Trend-Like Position Malfunction in Hill-Rom Affinity Three Medical Equipment?
To fix a Trend-Like position malfunction in Hill-Rom Medical Equipment, verify that the Trend-Like position release handles are properly adjusted and functional.
What causes Hilow Drive Operation Failures in Hill-Rom Affinity Three?
To address Hilow Drive Operation Failures, replace the hilow motor. If the problem persists, contact Hill-Rom Technical Support.
What causes Head Drive Operation Failures in Hill-Rom Affinity Three?
To address Head Drive Operation Failures, replace the head motor.
What causes Foot Drive Operation Failures in Hill-Rom Affinity Three Medical Equipment?
To address Foot Drive Operation Failures, replace the foot motor.
General| Power Source | Electric |
|---|---|
| Weight Capacity | 500 lbs |
| Backrest Angle | 0° to 70° |
| Side Rails | Yes |
| Lithotomy Position | No |
| Backrest Adjustment | Yes |
| Wheels | Yes |
| Brakes | Yes |
Manual provides requirements for Affinity® Three and Four Birthing Beds, including parts lists for replacement components.
Explains the different typefaces and symbols used in the manual for easier reading and understanding.
Identifies bed models P3700A, P3700B, P3700C, and P3700D with their respective descriptions.
Provides critical safety guidelines for operating and maintaining electric beds, emphasizing staff training.
Details the procedure for using the emergency CPR release mechanism, including handle location and function.
Illustrates and explains various warning and caution labels found on the bed for safety and operational awareness.
Guides users on how to begin troubleshooting, emphasizing authorized personnel and sequential procedure steps.
Lists necessary test equipment, primarily a multimeter (VOM), and its basic functions for troubleshooting.
Details procedures to verify proper operation of bed functions, covering various systems and controls.
Tests the proper functioning of the bed's hilow system, including operational checks and limit settings.
Provides steps to diagnose and resolve issues related to the bed's battery backup system, including voltage checks.
Details troubleshooting steps for problems with the CPR release mechanism, including adjustment and component checks.
Explains the electrical circuits and PC boards on the bed, referencing wiring diagrams for troubleshooting.
States that a detailed theory of operation is not available for the bed.
Lists all necessary tools and supplies required for servicing the bed, including specific wrenches and bits.
Provides step-by-step instructions for removing and replacing the top motor cover, including safety precautions.
Covers the removal, replacement, and adjustment procedures for the hilow drive motor assembly.
Provides instructions for removing, replacing, and handling the logic control PC board, including safety precautions.
Explains the removal and replacement procedures for the siderail assembly, including cable and component disconnection.
Describes the removal, replacement, and adjustment procedures for the bed's casters, including brake/steer functions.
Provides information on how to order replacement parts and contact Hill-Rom Technical Support with necessary data.
Lists recommended spare parts for servicing the beds, including part numbers, quantities, and descriptions.
Provides an exploded view and parts list for the main frame module of the Affinity® bed.
Details parts for the electronics module, sheet 1 of 3, including power cords, fuses, and cable assemblies.
Provides an exploded view and parts list for the P3700A foot support module.
Lists components for the air module, including hoses, pumps, and PCB assemblies.
Lists parts for the P3700B/C base module, sheet 1 of 2, detailing components like pedals and brake links.
Lists parts for the P3700B/C sleep deck, including wire forms, latches, and foot sections.
Provides instructions and warnings for cleaning the bed unit, including safe cleaning agents and avoiding excess moisture.
Gives essential safety precautions and procedures for servicing the bed, including unplugging and securing the unit.
Outlines the importance and schedule for performing preventive maintenance (PM) on the beds to ensure longevity.
Explains the proper use of Loctite® retaining compounds during service procedures, including types and application.
Lists available bed accessories with their product numbers and descriptions, including safe working loads.
Details the installation, adjustment, and removal procedures for the labor bar accessory.
Explains the installation and removal of the oxygen tank holder accessory.
Covers the installation, adjustment, and removal of calf or full leg support accessories.
To Next Page