Appx.15
Mounting Instrument in Rack
Appx. 8 Mounting Instrument in Rack
By using the internal threads on the sides, a rack mounting plate can be attached on the instrument.
WARNING
To prevent instrument damage or an electric shock, use only the screws that
originally secure the stands and the cover. (Stands: M3 × 6 mm, sides: M4 × 6
mm, when attaching a rack mounting plate: M4 × 10 mm)
If you lost any screws or nd that any screws are damaged, please contact your
Hioki distributor for a replacement.
Rack mounting plate (EIA)
t: 2.3
11.3 mm
76.3 mm
40 mm
32.5 mm
32 mm
88 mm
44.5 mm
Appx.
To Next Page
Loading...
