Appx.16
Mounting Instrument in Rack
M3 × 6 mm
M4 × 6 mm
1
Remove the stands from the bottom
of the instrument, and the screws
from the sides (4 near the front).
Rack mounting plate
M4 × 10 mm
Spacers
2
Install the spacers on both sides
of the instrument, secure the rack
mounting plate with the M4 × 10
screws.
• When installing the instrument into the rack, support the instrument with a commercially
available support stand.
• Ensure that the vents on the sides and rear are not blocked.
To Next Page
Loading...
