Hiwin E1 Series User Manual

E1 Series Servo Drive User Manual Chapter Overview
Chapter Overview
Chapter
Title
Contents
1 E1 series servo motor This chapter introduces servo motor models.
2 E1 series servo drive
This chapter introduces servo drive models and regenerative
resistor selection.
3 Excellent Smart Cube (ESC)
This chapter provides model explanation of Excellent Smart
Cube (ESC).
4 Specification
This chapter provides specification, dimensions and
installation instructions of the servo drive.
5 Electrical planning
This chapter provides wiring precautions and connector
introduction.
6
Basic function settings before
operation
This chapter describes basic functions which need to be set
before operation.
7
Software settings and trial
operation
This chapter describes how to do servo drive settings via
Thunder.
8 Application function
This chapter provides introduction of general-purpose digital
inputs, general-purpose digital outputs, control mode settings
and full-closed loop function.
9
Trial operation when
connected to controller
This chapter describes parameters which need to be set
when connected to controller.
10 Tuning This chapter describes servo tuning tools.
11 Monitoring
This chapter describes servo drive status, I/O status and
physical quantity monitoring.
12 Safety function This chapter describes the supported safety function.
13
Troubleshooting and
maintenance
This chapter describes servo drive alarms and
troubleshooting.
14 Panel operation
This chapter describes functions and operation of the servo
drive panel.
15 Parameters
This chapter provides function parameters and parameter
numbers.
16 Appendix
This chapter provides the required accessories for servo
drive setup.

Hiwin E1 Series Specifications

General

Brand	Hiwin
Model	E1 Series
Category	Servo Drives
Language	English