Hiwin E1 Series User Manual

E1 Series Servo Drive User Manual Panel Operation
14-14 HIWIN MIKROSYSTEM CORP.
MD09UE01-1910
14.4.1 Displaying alarm history (Ft000)
Table14.4.1.1
Step Display Key Operation
1
Press F key to go to auxiliary function mode
(Ft). If the displayed number is not Ft000,
press UP or DOWN key to display Ft000.
2
Press DATA/SHIFT
key for one second to
display the latest alarm.
3
Press UP key to display
previous alarm.
Press DOWM key to display next alarm. The
larger the leftmost digit is, the older the
displayed alarm is. For information of alarm,
please refer to section
13.2.
4
Press DATA/SHIFT key to display the lower
four digits of time stamp.
5
Press DATA/SHIFT key to display the
middle four digits of time stamp.
6
Press DATA/SHIFT key to display the upper
two digits of time stamp.
7
Press DATA/SHIFT key to display alarm
number.
8
Press DATA/SHIFT key for one second to
display Ft000.
Alarm number

Hiwin E1 Series Specifications

General

Brand	Hiwin
Model	E1 Series
Category	Servo Drives
Language	English