Hiwin E1 Series - Page 392

E1 Series Servo Drive User Manual Appendix
16-10 HIWIN MIKROSYSTEM CORP.
MD09UE01-1910
Table16.1.6.1
Name
HIWIN Part
Number
Description
USB
communication
cable
051700800366
USB2.0 Type A to mini-B 5 Pin; 1.8 m, mini-B connector (servo drive
side)
To use Thunder, the servo drive must be connected to PC via CN3.
Figure16.1.6.2 Servo drive communication cable (for gantry control system)
Table16.1.6.2 Communication cable for gantry function
Name
HIWIN Part
Number
Description
Servo drive
communication
cable
HE00EJ6DD000
Connect two servo drives which both support gantry function via CN8.
(0.5 m)
Servo drive 1 CN8
Servo drive 2 CN8