E1 Series Servo Drive User Manual Electrical Planning
HIWIN MIKROSYSTEM CORP. 5-17
(2) Ensure the components are compatible with the input power.
The residual voltage inside the servo drive could still be high after power off. To avoid electric shock, do not
touch the power terminals. After the voltage discharges, the indicator goes off. Ensure the indicator goes off
before wiring or examination.
The main circuit power supply and control power supply must be turned on at the
same time. Or the control power supply must be turned on before the main circuit
power supply.
While turning off the main circuit power supply and control power supply, turn off the
main circuit power supply before the control power supply.
To Next Page
Loading...
Need help?
General
