E1 Series Servo Drive User Manual Safety Precautions
Storage
Do not store the product in location which is subject to water, water drop, harmful gas,
harmful liquid or direct sunlight.
Transportation
Carefully move the product to avoid damage.
Do not apply excessive force to the product.
Do not stack the products to avoid collapse.
Installation site
Do not install the product in location with high ambient temperature and high humidity
or location which is subject to dust, iron powder or cutting powder.
Install the product in location with ambient temperature stated in this manual. Use
cooling fan if the ambient temperature is too high.
Do not install the product in location which is subject to direct sunlight.
The product is not drip-proof or waterproof, so do not install or operate the product
outdoor or in location which is subject to water or liquid.
Install the product in location with less vibration.
Motor generates heat while running for a period of time. Use cooling fan or disable the
motor when it is not in use, so the ambient temperature will not exceed its specification.
Installation
Do not place heavy object on the product, or it may cause injury.
Prevent any foreign object from entering the product, or it may cause fire.
Install the product in the specified orientation, or it may cause fire.
Avoid strong shock to the product, or it may cause malfunction or injury.
While installing the product, take its weight into consideration. Improper installation
may cause damage to the product.
Install the product on noncombustible object, such as metal to avoid fire.
Wiring
Ensure wiring is correctly performed. Otherwise, it may lead to product malfunction or
burn-out. There could be a risk of injury or fire.
Operation and transportation
Use power supply specified in product specification, or it may cause injury or fire.
The product may suddenly start to operate after power supply recovers. Please do not
get too close to the product.
Set external wiring for emergency stop to stop the motor at any time.
Maintenance
Do not disassemble or modify the product.
If the product malfunctions, do not repair the product by yourselves, please contact
HIWIN for repair.
To Next Page
Loading...
Need help?
General
