OPERATING INSTRUCTIONS FOR PROCESSING COBAS AMPLICOR™ CT/NG
SAMPLES
ThinPrep 2000 Processor Operator’s Manual
5B.17
To view the diagnostic modes, push the down arrow key from the Main Menu and the options will
be displayed. To return to the idle mode and the sample processing sequences, push the STOP key. To
initiate the diagnostic modes, push the number of the desired option. The diagnostic modes return to
the previous screen automatically upon their completion or after the operator pushes the STOP key.
If the ThinPrep 2000 processor detects an error condition during any sequence, the sequence will
abort, the system will attempt to recover and a message will be displayed. Refer to Chapter 6,
“Instrument Troubleshooting”, for more information.
Caution:
The only processing sequence to be used for processing samples requiring microbio-
logical testing using the Roche Diagnostics COBAS/AMPLICOR CT/NG test is # 4- GYN.
To Next Page
Loading...
