Hologic thinprep 2000 - HOW TO USE THIS SECTION

6
INSTRUMENT TROUBLESHOOTING
6.2 ThinPrep 2000 Processor Operator’s Manual
HOW TO USE THIS SECTION
This section lists all the ThinPrep
®
2000 processor messages. The messages are divided into warnings
and errors. The description of each message includes a reason for the message, possible causes, and a
troubleshooting flowchart.
Follow the three-step procedure listed below for any displayed message.
1. Record the message displayed on the ThinPrep 2000 processor display panel before pressing the
ENTER key.
2. Look up the message in the “CONTENTS” on page 6.3.
(If an error message is displayed that is not in this list, the error cannot be corrected by the opera-
tor. Contact Hologic Technical Support.)
3. Follow the instructions in the troubleshooting procedure flowchart.
SECTION
B