MAINTENANCE
ThinPrep 2000 Processor Operator’s Manual
7.1
Chapter Seven
Maintenance
INTRODUCTION
This chapter describes routine maintenance procedures for the ThinPrep
®
2000 processor.
This chapter includes the following sections:
SECTION B:
Emptying Waste Bottle 7.2
SECTION C:
Filter Cap Cleaning 7.4
SECTION D:
Filter Cap O-ring Lubrication 7.5
SECTION E:
Filter Seal O-ring Replacement 7.6
SECTION F:
Door Cleaning 7.7
SECTION G:
Cap Seal Cleaning 7.8
SECTION H:
General Cleaning 7.9
SECTION I:
Waste Tubing Replacement 7.10
SECTION J:
Waste Filter Replacement 7.14
SECTION K:
Emptying and Cleaning the Catch Tray 7.16
SECTION L:
Moving the ThinPrep 2000 Processor 7.17
SECTION M:
Maintenance Schedule 7.18
Note:
Any procedure not described in this section requires specially trained personnel. Contact
Hologic Technical Service for more information.
To Next Page
Loading...
