Hologic thinprep 2000 - Sample too Dense. Dilute 20:1

6
INSTRUMENT TROUBLESHOOTING
6.28 ThinPrep 2000 Processor Operator’s Manual
Sample Too Dense. Dilute 20:1
This message is displayed when the sample is too dense for the instrument to make a satisfactory
slide. This will halt processing and no slide will be made. This message is followed by an audible
alert until the operator presses the ENTER key.
Reason for Message
There is a possibility of high concentration of material in the sample vial.
Procedure
See flowchart on next page.