THINPREP 2000 INSTALLATION
ThinPrep 2000 Processor Operator’s Manual
2.3
Caution:
Turning the power on before instructed to do so can damage the instrument and inval-
idate your warranty.
Rotating Plate Packaging Removal:
1. Open the door of the ThinPrep 2000 processor by sliding it to the right.
2. Grasp the foam shipping insert and pull it straight forward, out of the instrument.
Note:
The foam insert fits very tightly in the instrument. Use care when removing it to pull straight
outward and not dislodge any of the mechanisms.
To Next Page
Loading...
