8 Maintenance
8.6 Replacing the Battery Pack
Honeywell 2024
235
l
Unlock the keypad and type the PASSCODE to enter level 2 or level 3 menus. Refer to the
section “Accessing level 2 mode” for accessing level 2 mode or section “Access level 3
mode” for accessing level 3 mode.
l
Scroll down in to HMI menu to L2.12 or L3.12 where it displays: “RESET BATT” on LCD
and then press the Enter key.
l
Press YES key to confirm (see note below).
l
EC350 resets the battery usage Items to factory default values: (Item 59 = 0, Item 1001 =
60 mo, Item 1002 = 100%).
l
Press ESC until you have exited the HMI.
To Next Page
Loading...
