Honeywell EC350 User Manual

6 User Access
6.2 Working with HMI
Honeywell 2024
155
6.2.7.1 Selecting the unit of measurement for volume
To select the unit of measurement for volume:
l
Unlock the keypad and type the PASSCODE to enter level 2 mode or level 3 mode. Refer to the
section “ Accessing level 2 mode ” for accessing level 2 mode or section “ Access level 3 mode ” for
accessing level 3 mode.
l
By default, in level 2 mode or level 3 mode the following appears on the display.
MAIN MENU
ALARMS
l
Using the UP arrow and DOWN arrow scroll through the options in level 2 mode or level 3 mode
until CONFIG appears.
l
Press OK. The following appears on the display.
CONFIG
ALARMS
l
Using the UP arrow and DOWN arrow scroll through the options in level 2 mode or level 3 mode
until VOLUME appears.
l
Press OK.
By default, following appears on the display.
VOLUME
INPUT TYPE
l
Press the DOWN arrow key.
The following appears on the display.
VOLUME
CORVOL
l
For corrected volume, press OK.
By default, the following appears on the display.
00000000
CCF CORVOL
l
To select the unit for corrected volume, press the DOWN arrow key.
The following appears on the display.
5

Honeywell EC350 Specifications

General

Brand	Honeywell
Model	EC350
Category	Measuring Instruments
Language	English