Honeywell EC350 - 6.6 Connecting EC350 with PowerSpring using a Messenger Modem; 6.6.1 Configure EC350 using MasterLink Software Application

6 User Access
6.6 Connecting EC350 with PowerSpring using a Messenger Modem
Honeywell 2024
211
6.6 Connecting EC350 with PowerSpring using a Messenger Modem
Follow the steps below to connect a EC350 device with PowerSpring using a Messenger Modem:
l
Configure EC350 using MasterLink Software Application
l
Configure EC350 in PowerSpring
6.6.1 Configure EC350 using MasterLink Software Application
Launch MasterLink Software Application , and go to DISPLAY tab in tool bar and click on Item by Function
option.
Inside the Display/Change Items By Function window double click the Site Information option.
Configure the following parameters:
l
SITE INFORMATION: The site ID should be identical to (six digit, hexadecimal) the one configured in
PowerSpring during the EC350 product addition.
PowerSpring can use Site ID 1 or Site ID 2, that is setup in System Configuration -> Data Collection
settings. The default is Site ID 2.