4 Securing the device
4.5 Validating setup configuration
Honeywell 2024
63
4.5 Validating setup configuration
After installing EC350 on the meter and updating its configuration settings, ensure to perform the
following final checkout tasks:
l
Verify the pulse input. Refer to the section “Testing the pulse input”.
l
Verify corrected and uncorrected volume. Refer to the section “Selecting the unit of measure”.
l
Verify pressure/temperature factors. Refer to the section “Verifying pressure” or "Verifying
temperature".
To Next Page
Loading...
Need help?
General
