HP PROCURVE 2910AL

Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Syntax: [no] ip ssh
Enables or disables SSH on the switch.
[cipher <cipher-type>]
Specify a cipher type to use for connection.
Valid types are:
• aes128-cbc
• 3des-cbc
• aes192-cbc
• aes256-cbc
• rijndael-cbc@lysator.liu.se
• aes128-ctr
• aes192-ctr
• aes256-ctr
Default: All cipher types are available.
Use the no form of the command to disable a cipher type.
[filetransfer]
Enable/disable secure file transfer capability. SCP and SFTP
secure file transfer will not function unless SSH is also
enabled.
[mac <mac-type>]
Allows configuration of the set of MACs that can be selected.
Valid types are:
• hmac-md5
• hmac-sha1
• hmac-sha1-96
• hmac-md5-96
Default: All MAC types are available.
Use the no form of the command to disable a MAC type.
7-17