EasyManua.ls Logo

HP PROCURVE 2910AL - Configuring Standard Acls

HP PROCURVE 2910AL
594 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IPv4 Access Control Lists (ACLs)
Configuring Standard ACLs
Configuring Standard ACLs
Table 9-6. Command Summary for Standard ACLs
Action Command(s) Page
Create a Standard,
Named ACL
or
Add an ACE to the End
of an Existing Stan-
dard, Named ACL
ProCurve(config)# ip access-list standard < name-str >
ProCurve(config-std-nacl)# < deny | permit >
< any | host <SA > | SA/< mask-length > | SA < mask >>
1
[log]
2
9-46
Create a Standard,
Numbered ACL
or
Add an ACE to the End
of an Existing
Standard, Numbered
ACL
ProCurve(config)# access-list < 1-99 > < deny | permit >
< any | host <SA > | SA/< mask-length > | SA < mask >>
[log]
2
9-49
Use a Sequence
Number To Insert an
ACE in an ACL
ProCurve(config)# ip access-list standard < name-str | 1-99 >
ProCurve(config-std-nacl)# 1-2147483647 < deny | permit >
< any | host <SA > | SA/< mask-length > | SA < mask >>
1
[log]
2
9-76
Use an ACE’s
Sequence Number To
Delete the ACE from
an ACL
ProCurve(config)# ip access-list standard < name-str | 1-99 >
ProCurve(config-std-nacl)# no < 1-2147483647 >
9-79
Resequence the ACEs
in an ACL
ProCurve(config)# ip access-list resequence < name-str | 1-99 > < 1-2147483647 >
< 1-2147483646 >
9-80
Enter or Remove a
Remark from an ACL
ProCurve(config)# ip access-list standard < name-str | 1-99 >
ProCurve(config-ext-nacl)# [ remark < remark-str > | no < 1-2147483647 > remark ]
9-81
9-83
For numbered, standard ACLs only, the following remark commands can be
substituted for the above:
ProCurve(config)# access-list < 1 - 99 > remark < remark-str >
ProCurve(config)# [no] access-list < 1 - 99 > remark
Delete an ACL ProCurve(config)# no ip access-list standard < name-str | 1-99 >
9-74
For numbered, standard ACLs, the following command can be substituted for the
above:
ProCurve(config)# access-list < 1 - 99 > remark < remark-str >
1
The mask can be in either dotted-decimal notation (such as 0.0.15.255) or CIDR notation (such as /20).
2
The [ log ] function applies only to “deny” ACLs, and generates a message only when there is a “deny” match.
9-44

Table of Contents

Other manuals for HP PROCURVE 2910AL

Related product manuals