HP PROCURVE 2910AL - Assigning a Local Login (Operator) and Enable (Manager) Password; Configuring the Switch for SSH Operation

Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Configuring the Switch for SSH
Operation
SSH-Related Commands in This Section Page
show ip ssh 7-18
[keylist-str] [< babble | fingerprint>]
cert [rsa] <keysize> | ssh [ dsa | rsa [bits <keysize>]]
aaa authentication ssh
<public key file> [<append | manager | operator>]
show crypto client-public-key [<manager | operator>] 7-26
show crypto host-public-key [< babble | fingerprint >] 7-14
show authentication 7-22
crypto key < generate | zeroize > [autorun-key [rsa] | 7-10
ip ssh 7-16
cipher <cipher-type> 7-17
filetransfer 7-17
mac 7-17
port < 1 - 65535|default > 7-16
timeout < 5 - 120 > 7-16
login < local | tacacs | radius | public-key > 7-20, 7-21
< local | none > 7-20
enable < tacacs | radius | local > 7-20
< local | none > 7-20
copy tftp pub-key-file <tftp server IP> 7-26
clear crypto client-public-key [keylist-str] 7-27
1. Assigning a Local Login (Operator) and
Enable (Manager) Password
At a minimum, ProCurve recommends that you always assign at least a
Manager password to the switch. Otherwise, under some circumstances,
anyone with Telnet, web, or serial port access could modify the switch’s
configuration.
7-8