EasyManuals Logo

HP PROCURVE 2910AL User Manual

HP PROCURVE 2910AL
594 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #184 background imageLoading...
Page #184 background image
RADIUS Authentication and Accounting
Commands Authorization
Displaying Authorization Information
You can show the authorization information by entering this command:
Syntax: show authorization
Configures authorization for controlling access to CLI
commands. When enabled, the switch checks the list of commands
supplied by the RADIUS server during user authentication to
determine if a command entered by the user can be executed.
An example of the output is shown.
ProCurve(config)# show authorization
Status and Counters - Authorization Information
Type | Method
-------- + ----- -
Commands | RADIUS
Figure 5-10. Example of Show Authorization Command
Configuring Commands Authorization on a RADIUS
Server
Using Vendor Specific Attributes (VSAs)
Some RADIUS-based features implemented on ProCurve switches use HP
VSAs for information exchange with the RADIUS server. RADIUS Access-
Accept packets sent to the switch may contain the vendor-specific informa-
tion. The attributes supported with commands authorization are:
HP-Command-String: List of commands (regular expressions) that
are permitted (or denied) execution by the user. The commands are
delimited by semi-colons and must be between 1 and 249 characters
in length. Multiple instances of this attribute may be present in
Access-Accept packets. (A single instance may be present in
Accounting-Request packets.)
HP-Command-Exception: A flag that specifies whether the
commands indicated by the HP-Command-String attribute are
permitted or denied to the user. A zero (0) means permit all listed
commands and deny all others; a one (1) means deny all listed
commands and permit all others.
5-28

Table of Contents

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

HP PROCURVE 2910AL Specifications

General IconGeneral
ModelHP ProCurve 2910al
Switching Capacity128 Gbps
Throughput95.2 Mpps
ManagementWeb, CLI, SNMP
Jumbo Frame SupportYes
ManageableYes
Power100-240 VAC
Power SupplyInternal
Operating Temperature0°C to 45°C (32°F to 113°F)
StackingYes
MAC Address Table Size32000 entries
Routing ProtocolRIP, OSPF
FeaturesIPv6, VLAN, QoS, ACLs
Operating Humidity15% to 95% non-condensing
Uplink Ports4
Power over EthernetYes (PoE+ models available)

Related product manuals