To Next Page

To Previous Page

Configuring Secure Socket Layer (SSL)

Common Errors in SSL setup

Error During Possible Cause

Generating host certificate on CLI You have not generated a certificate

key. (Refer to “CLI commands used to

generate a Server Host Certificate” on

page 8-10.)

Enabling SSL on the CLI or Web browser interface You have not generated a host

certificate. (Refer to “Generate a Self-

Signed Host Certificate with the Web

browser interface” on page 8-12.)

You may be using a reserved TCP port.

(Refer to “Note on Port Number” on

page 8-20.)

Unable to Connect with SSL You may not have SSL enabled (Refer

to “3. Enabling SSL on the Switch and

Anticipating SSL Browser Contact

Behavior” on page 8-17.)

Your browser may not support SSLv3

or TLSv1 or it may be disabled. (Refer

to the documentation provided for

your browser.)

8-21

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General