HP PROCURVE 2910AL - Generate a CA-Signed Server Host Certificate with the Web Browser Interface

Configuring Secure Socket Layer (SSL)
Configuring the Switch for SSL Operation
Current SSL Host Certificate
Figure 8-6. Web browser Interface showing current SSL Host Certificate
Generate a CA-Signed server host certificate with the
Web browser interface
To install a CA-Signed server host certificate from the web browser interface.
For more information on how to access the web browser interface, refer to
the chapter titled “Using the ProCurve Web Browser Interface” in the Man-
agement and Configuration Guide for your switch.
The installation of a CA-signed certificate involves interaction with other
entities and consists of three phases. The first phase is the creation of the CA
certificate request, which is then copied off from the switch for submission to
the certificate authority. The second phase is the actual submission process
8-15