To Next Page

To Previous Page

Web and MAC Authentication

Configuring Web Authentication

Show Commands for Web Authentication

Command Page

show port-access web-based [port-list] 3-26

show port-access web-based clients [port-list] 3-27

show port-access web-based clients <port-list> detailed 3-28

show port-access web-based config [port-list] 3-29

show port-access web-based config <port-list> detailed 3-30

show port-access web-based config [port-list] auth-server 3-31

show port-access web-based config [port-list] web-server 3-31

Syntax: show port-access web-based [port-list]

Displays the status of all ports or specified ports that are

enabled for Web authentication. The information displayed

for each port includes:

• Number of authorized and unauthorized clients

• VLAN ID number of the untagged VLAN used. If the switch

supports MAC-based (untagged) VLANs, MACbased is

displayed to show that multiple untagged VLANs are

configured for authentication sessions.

• If tagged VLANs (statically configured or RADIUS-

assigned) are used (Yes or No)

• If client-specific per-port CoS (Class of Service) values are

configured (Yes or No) or the numerical value of the CoS

(802.1p priority) applied to all inbound traffic. For client-

specific per-port CoS values, enter the show port-access

web-based clients detailed command.

• If per-port rate-limiting for inbound traffic is applied (Yes

or No) or the percentage value of the port’s available

bandwidth applied as a rate-limit value.

• If RADIUS-assigned ACLs are applied

Information on ports not enabled for Web Authentication is

not displayed.

3-26

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General