HP PROCURVE 2910AL User Manual

Web and MAC Authentication
Configuring Web Authentication
Syntax: show port-access web-based config <port-list> detailed
Displays more detailed information on the currently config-
ured Web Authentication settings for specified ports.
ProCurve(config)# show port-access web-based config 1 detailed
Port Access Web-Based Detailed Configuration
Port : 1 Web-based enabled : Yes
Client Limit : 1 Client Moves : No
Logoff Period : 300 Re-Auth Period : 0
Unauth VLAN ID : 0 Auth VLAN ID : 0
Max Requests : 3 Quiet Period : 60
Server Timeout : 30
Max Retries : 3 SSL Enabled : No
Redirect URL :
...
Figure 3-10. Example of show port-access web-based config detail Command Output
3-30

HP PROCURVE 2910AL Specifications

General

Model	HP ProCurve 2910al
Switching Capacity	128 Gbps
Throughput	95.2 Mpps
Management	Web, CLI, SNMP
Jumbo Frame Support	Yes
Manageable	Yes
Power	100-240 VAC
Power Supply	Internal
Operating Temperature	0°C to 45°C (32°F to 113°F)
Stacking	Yes
MAC Address Table Size	32000 entries
Routing Protocol	RIP, OSPF
Features	IPv6, VLAN, QoS, ACLs
Operating Humidity	15% to 95% non-condensing
Uplink Ports	4
Power over Ethernet	Yes (PoE+ models available)