To Next Page

To Previous Page

Configuring and Monitoring Port Security

Reading Intrusion Alerts and Resetting Alert Flags

Menu: Checking for Intrusions, Listing Intrusion Alerts, and

Resetting Alert Flags

The menu interface indicates per-port intrusions in the Port Status screen, and

provides details and the reset function in the Intrusion Log screen.

1. From the Main Menu select:

1. Status and Counters

4. Port Status

The Intrusion Alert

column shows

“Yes” for any port

on which a security

violation has been

Figure 13-13. Example of Port Status Screen with Intrusion Alert on Port A3

2. Type

[I] (Intrusion log) to display the Intrusion Log.

MAC Address

of Intruding

Device on

Figure 13-14. Example of the Intrusion Log Display

The example in Figure 7-11 shows two intrusions for port A3 and one

intrusion for port A1. In this case, only the most recent intrusion at port

A3 has not been acknowledged (reset). This is indicated by the following:

System Time of Intrusion on Port

Indicates this intrusion on port

A3 occurred prior to a reset

(reboot) at the indicated time

13-36

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General